Driver LCA 100W 1100–2100mA one4all SR PRE

premium series

Product description

• NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
• Independent dimmable constant current LED driver with strain-relief
• Dimmable via DALI / DALI-2
• Dimming range 1 – 100 % (whole operating window)
• Adjustable output current between 1,100 and 2,100 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
• Max. output power 100 W
• Up to 92 % efficiency
• Power input on stand-by < 0.2 W
• Nominal lifetime up to 100,000 h
• 5 years guarantee

Housing properties

• Casing: polycarbonate, white
• Type of protection IP20
• Strain relief with loop through function

Interfaces

• one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
• ready2mains (configuration and dimming via mains)
• Terminal blocks: 0° / 45° push terminals (input / output)

Functions

• Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
• Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
• Constant light output function (CLO)
• Power-up fading at AC
• Configurable via ready2mains
• Switch off the driver with fade2zero
• Service monitor to log certain events
• Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
• Suitable for emergency escape lighting systems acc. to EN 50172
• For cable cross-sections up to 2.5 mm²

Benefits

• Application-oriented operating window for maximum compatibility
• Best energy savings due to low stand-by losses and high efficiency
• Flexible configuration via DALI, ready2mains and I-SELECT 2
• No tools required for installation

Typical applications

• For applications in downlight, panel and low Bay / high Bay luminaires