OT Dim 10v & 24 Module - 4050300943459
The control units complete the LED system from OSRAM. In addition to the LED modules and the OPTOTRONIC converters, an OT DIM dimmer unit and colour control units are available.
The controllers are used on the secondary side of the power supplies. This means they are connected between the OPTOTRONIC power supply and the LED modules. The controllers are suitable for both 10 V and 24 V LED modules and can therefore be used universally.
Product benefits:
- Safety requirement due to overload
- Overtemperature
- Short-circuit protection
Product features:
- Intelligent analog dimmer (1-10 V) with constant output voltage
- 2 Pairs of output terminals, single channel device
- Dimming range: 0.1 - 100 %
- Cable clamp housing for independent mounting
Areas of application:
Dimensions & weight
Mounting hole spacing, length
Cable cross-section, input side
Cable cross-section, output side
Wire preparation length, input side
Wire preparation length, output side
Temperatures & operating conditions
Ambient temperature range
Maximum temperature at tc test point
Temperature range at storage
Permitted rel. humidity during operation
Capabilities
Dimming method
Amplitude Modulation / Pulse Width Modulation
Suitable for fixtures with prot. class
Type of connection, output side
Certificates & standards
Approval marks – approval
Standards
Acc. to DIN VDE 0875/CISPR 15/EN 55015/Acc. to EN 61547/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61046/Acc. to IEC 61347-2-2/Acc. to UL 508
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Primary Article Identifier
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Suitable for indoor SELV installations
- EAN: 4050300943459
- Output power (at 24 V): max. 120 W
- Output power (at 10V): max. 50 W
- Input voltage: 10.5 - 24 V
- Output voltage: 10.5 - 24 V
- ECG efficiency: 96 %
- Nominal voltage: 10 - 24 V
- Device power losses: max. 4 W
- Galvanic isolation primary/secondary: 3.75 kV
- Lenght: 172 mm
- Width: 42 mm
- Height: 20 mm
- Cable cross-section, input side: 0.5 - 1. sqmm
- Cable cross-section, output side: 0.5 - 1.5 sqmm
- Casing material: Plastic
- Ambient temperature range: -20 +50 C
- Max. temperature at tc test point: +70 C
- Max. housing temperature in case of fault: +100 C
- ECG Lifetime: 50000 h
- Dimmable: yes (up to 2 channels PWM output)
- Dimming range: 0 - 100 %
- Suitable for fixtures with prot. class: II
- Overheating protection: Automatic reversible
- Overload protection: Automatic reversible
- No-load proof: yes
- Type of protection: IP20